Tell you how to use the rope tensioner

China supplier of quality auto parts
NEWS INFORMATION
Tell you how to use the rope tensioner
Home > NEWS >
With the continuous development of my country's economy, the requirements of logistics and transportation are also rapidly expanding, and an efficient development trend has been established. Modern logistics requires not only fast speed, but also enough to ensure the safety of goods, so the use of rope tighteners is indispensable. Next, Shengyuan Auto Parts, a manufacturer of rope tighteners, will tell you what is a rope tightener? What are the ways to use the rope tensioner?
 
What is a rope tensioner
 
The rope tightener is generally used for bundling or reinforcement of goods, and most rope tighteners are installed on the beams on both sides of the truck. A normal medium-sized truck needs to be installed about 30-60 pieces. . Most of the previous trucks used very rigid suspension buckles, or the kind that needed to be knotted, which was not only unsafe in wind and rain, but also very troublesome. In order to avoid these risks, the current trucks basically use rope tensioners in terms of cargo fixation, especially in flatbeds and semi-trailers. Although it is not very conspicuous that the rope tensioner is welded under the cargo box, it does make the driver a lot easier for the fixing of the cargo.紧绳器

How to use the rope tensioner
 
1. When we are using a rope to bind the goods, we can first fix one end of the rope on the round rod, then insert the crowbar into the shaft head and then turn it, so that the ratchet can be rotated to tighten the rope, and then Attach the bird catch to the ratchet for securement. Then just loosen the rope, pull the bird stopper so the axle can turn freely, and finally loosen the rope. The whole process is easy to operate, labor-saving and safe to use.
紧绳器
2. Another method is to first insert a wire of suitable length and thickness into the round hole in the middle of the tiger head take-up wheel, and then use the tiger head wire tensioner to wind the wire twice, remember to put the other side of the wire. Tie one end to the fixing point, then straighten the wire, and fasten the tiger head wire tensioner to the wire, so that the handle can be moved to tighten the wire.紧绳器
3. The method of pulling the ratchet thread tensioner by hand is to first pull the card plate on the handle tensioner to the position where the thread is released. Then pull out all the wire ropes, hang the hook on the fixed point, and then pull the card plate to the position of the tightening wire, stretch it forward along the wire, and then clip it into the bayonet of the hand tightening device. Then pinch the wire with one hand, and move the hand-reel wrench with the other hand to slowly tighten the wire, so that it can be securely fixed.紧绳器

PREVIOUS PAGE:Interpretation of auto parts in the Sino-US trade war for you
NEXT PAGE:Container accessories rope tightener wholesale teaches you how to choose a reliable container accessories manufacturer

HOME ABOUT US PRODUCTS       - carriage hinge       - truck rope tensioner       - Cam Locks / Lock Kits       - hook grappling hook       - rubber products       - Door Hinge       - Recessed Paddle Locks       - Other body and accessories       - Steyr hinge       - quarter forged lock       - lock accessories       - H Rubbers NEWS CULTURE WORKSHOP CONTACT